{"title":"Arcade","description":"\u003cp\u003eBrowse our Arcade collection. Best Price.\u003c\/p\u003e","products":[{"product_id":"28mm011-arcade-button-dupont-to-spade-wires-10-pack","title":"2.8mm\/0.11\" Arcade Button Dupont to Spade Wires (10-Pack)","description":"\u003cp\u003eThese 2.8mm DuPont to spade wire sets will make wiring up arcade buttons to your Raspberry Pi a breeze!\u003c\/p\u003e\n\u003cp\u003eEach wire comes with a single female DuPont connection (to connect to a Raspberry Pi GPIO pin) on one end and a 2.8mm\/0.11\" spade terminal (to connect to your arcade button) on the other. The spade terminal has a rubber sleeve to protect the connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe colour of the wire may vary\u003c\/strong\u003e! The wires are 35cm long, and come in a pack of 10 wires.\u003c\/p\u003e\n\u003cp\u003eThese wires fit many common arcade buttons such as our 30mm arcade buttons and our range of Sanwa Arcade Buttons! We also offer a 4.8mm set here.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour: White \u003cstrong\u003eor\u003c\/strong\u003e Red (varies)\u003c\/li\u003e\n\u003cli\u003e35cm Long\u003c\/li\u003e\n\u003cli\u003ePack of 10 Wires (will connect 5 buttons)\u003c\/li\u003e\n\u003cli\u003eDupont to 2.8mm\/0.1\" Spade Terminal\u003c\/li\u003e\n\u003cli\u003eRubber sleeves for spade connections\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":48401550901469,"sku":"crj1787257815815","price":2.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/1875\/4525\/files\/28mm011-arcade-button-dupont-to-spade-wires-10-pack_1.jpg?v=1787257824"},{"product_id":"controlblock-game-controllers-power-switch-and-io-for-the-raspberry-pi","title":"ControlBlock - Game Controllers, Power Switch and I\/O for the Raspberry Pi","description":"\u003cp\u003e\u003cstrong\u003eThe ControlBlock has been updated!\u003c\/strong\u003e Similar to the PowerBlock it now comes with \u003cstrong\u003eUSB-C\u003c\/strong\u003e for the Raspberry Pi 4 and 5 and a high-current (7A!) power switch circuitry for your most energy demanding projects.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe ControlBlock is an add-on board for the Raspberry Pi. The two key features of the ControlBlock are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA safe power button functionality to shutdown the Raspberry Pi without the risk of any data losses\u003c\/li\u003e\n\u003cli\u003eTerminal blocks and a driver for connecting original game controllers for arcade machines and various game consoles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe ControlBlock makes it very easy to connect arcade controllers or console controllers\u003c\/strong\u003e, for example, for (S)NES, Atari, Genesis\/Megadrive, or Sega Master System consoles. Up to two players are supported by a single ControlBlock. Stacked upon each other, up to four players are supported.\u003c\/p\u003e\n\u003cp\u003eThe open-source driver for the ControlBlock is easy to install and can be configured to your liking.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe power switch functionality allows you to turn on and off the power to the Raspberry Pi with a toggle switch without the risk of data loss. You can also connect a status LED for indicating the power status of the Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with all 40-pin models of Raspberry Pi\u003c\/strong\u003e (however a USB-C power supply is required). \u003cstrong\u003eNow compatible with Raspberry Pi 5\u003c\/strong\u003e - please see this blog entry for info.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports arcade and original game controllers\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eArcade controls\u003c\/li\u003e\n\u003cli\u003eSNES and NES controllers\u003c\/li\u003e\n\u003cli\u003eAtari controllers\u003c\/li\u003e\n\u003cli\u003eSega Master System controllers\u003c\/li\u003e\n\u003cli\u003eSega Genesis \/ Megadrive controllers\u003c\/li\u003e\n\u003cli\u003eAll supported controllers for up to two players\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eSafe power button (includes the same functionality as the PowerBlock)\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSupports toggle and momentary switches\u003c\/li\u003e\n\u003cli\u003eAutomatic detection of switch type\u003c\/li\u003e\n\u003cli\u003eSmooth power status indication via optional external LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAll 32 GPIO channels of the ControlBlocks can be accessed via SPI and, thus, can also be used for any other purpose for your project!\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 5V\u003c\/li\u003e\n\u003cli\u003eContinuous Current @ 25°C: maximum 7 A\u003c\/li\u003e\n\u003cli\u003eMOSFET Static On-Resistance: 0.006 Ω\u003c\/li\u003e\n\u003cli\u003eGPIO pins used\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e3.3V (pin 1)\u003c\/li\u003e\n\u003cli\u003e5V (pin 2)\u003c\/li\u003e\n\u003cli\u003eGPIO 17 (pin 11)\u003c\/li\u003e\n\u003cli\u003eGPIO 18 (pin 12)\u003c\/li\u003e\n\u003cli\u003eMOSI (pin 19)\u003c\/li\u003e\n\u003cli\u003eMISO (pin 21)\u003c\/li\u003e\n\u003cli\u003eSCLK (pin 23)\u003c\/li\u003e\n\u003cli\u003eCE0 (pin 24)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVendor website\u003c\/li\u003e\n\u003cli\u003eGithub repository\u003c\/li\u003e\n\u003cli\u003eTechnical Support forum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAttaching a Power Button\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h3\u003e\n\u003cp\u003eTo turn the Raspberry Pi on and off with the ControlBlock you need to attach a toggle or a momentary button to the two “switch” pins on the ControlBlock. The ControlBlock then uses the status of the attached button to power on or off the Raspberry Pi.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you do not want to use the power switch functionality you can disable this in the configuration file \/etc\/controlblockconfig.cfg by setting “powerswitch”: false.\u003c\/li\u003e\n\u003cli\u003eThe power switch circuitry of the ControlBlock leads to a tiny voltage drop and we made the experience that a good quality power supply and a good quality USB cable are mandatory for a working setup. If unsure, we can recommend the official Raspberry Pi Power Supply.\u003c\/li\u003e\n\u003cli\u003eYou can use both, a toggle or a momentary button.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAttaching a Power Supply\u003c\/h3\u003e\n\u003cp\u003eIf you want to use the power switch function of the ControlBlock you need to connect your (micro USB) connector only to the ControlBlock – and not to the Raspberry Pi directly.\u003c\/p\u003e\n\u003cp\u003eAlternatively to the micro USB connector you could also use the USB-B pin outs for soldering a USB-B connector to the ControlBlock. Also, you could use the 5V and GND input pins for power supply.\u003c\/p\u003e\n\u003ch3\u003eAttaching a Power Status LED\u003c\/h3\u003e\n\u003cp\u003eThe ControlBlock has pinouts for an optional status LED that indicates the power state of the Raspberry Pi. You can directly attach an LED to the pins that are marked with “LED”.\u003c\/p\u003e\n\u003cp\u003eYou need to pay attention to the polarity of the LED: The LED pins are marked with “+” and “-” for that.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe LED will blink in four different patterns that depend on the power state of the Raspberry Pi:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOff: The LED is simply off.\u003c\/li\u003e\n\u003cli\u003eBooting: The LED slowly fades in and out.\u003c\/li\u003e\n\u003cli\u003eOn: The LED constantly stays on.\u003c\/li\u003e\n\u003cli\u003eShutting down: The LED fades in and out twice as fast as during boot up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAttaching Controllers\u003c\/h3\u003e\n\u003cp\u003eThe cables of the arcade buttons, joysticks, as well as of the (S)NES or all other gamepads are connected to the ControlBlock via the screw terminal blocks. You need a slotted screwdriver with a maximum width of 2.5 mm for that.\u003cbr data-mce-fragment=\"1\"\u003eDetailed instructions for the individual controller types are given here.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eRegarding the software, you need to install the ControlBlock driver to enable the power switch and game controllers functions.\u003c\/p\u003e\n\u003cp\u003eYou can find detailed instructions for the driver installation here.\u003c\/p\u003e","brand":"PetRockBlog","offers":[{"title":"Default Title","offer_id":48401550967005,"sku":"mis1787257818103","price":25.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/1875\/4525\/files\/controlblock---game-controllers-power-switch-and-io-for-the-raspberry-pi_1.jpg?v=1787257826"},{"product_id":"gamepadblock-joystick-controller-interface-discontinued","title":"GamepadBlock - Joystick \u0026 Controller Interface [discontinued]","description":"\u003cp\u003e\u003cstrong\u003eConnect your favourite arcade and original game controllers to your computer (Windows, Mac, and Linux, including Raspberry Pi) with the GamepadBlock!\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe GamepadBlock is an Arcade and Original Game Controller USB Interface for your computer disigned to connect original controllers such as SNES, NES, Sega Genesis\/Megadrive, Atari, Amiga!\u003c\/p\u003e\n\n\u003cp\u003eDo you want to enjoy you original gamepad on your computer? Are you working on your own arcade machine? Or are you building your own retro-gaming machine with original controllers? The \u003cstrong\u003eGamepadBlock is the ideal device for easily connecting original gamepads and arcade controls like joysticks and buttons to your computer.\u003c\/strong\u003e It takes the original interface and converts it to USB for easy connection to your computer.\u003c\/p\u003e\n\n\u003cp\u003eDepending on the controller mode you can connect up to two gamepads to the GamepadBlock. It is fully HID compliant so that you do not need to install any drivers. Windows, Mac, and Linux are supported, which also includes system-on-chip platforms like the Raspberry Pi. You can use two or more adapters on one computer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eConnect your favourite arcade and original game controllers to your computer\u003c\/li\u003e\n\t\u003cli\u003eCompatible with Windows, Mac, and Linux(including, for example, Raspberry Pi™?)\u003c\/li\u003e\n\t\u003cli\u003eStandard HID (Human Interface Device) compliant: No need to install any drivers, plug the GamepadBlock into your PC and you are ready to go\u003c\/li\u003e\n\t\u003cli\u003eSupports any 4-way arcade joysticks and arcade buttons (for one player)\u003c\/li\u003e\n\t\u003cli\u003eCurrently supported original gamepads (each for up to two players):\n\t\u003cul\u003e\n\t\t\u003cli\u003eNintendo Entertainment System (NES)\u003c\/li\u003e\n\t\t\u003cli\u003eSuper Nintendo Entertainment System (SNES)\u003c\/li\u003e\n\t\t\u003cli\u003eSega Genesis\/Megadrive\u003c\/li\u003e\n\t\t\u003cli\u003eSega Mastersystem\u003c\/li\u003e\n\t\t\u003cli\u003eAtari\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003eController mode is set\n\t\u003cul\u003e\n\t\t\u003cli\u003evia DIP switch or\u003c\/li\u003e\n\t\t\u003cli\u003evia virtual COM port (scriptable)\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003eFull Speed USB 2.0 support, on-board micro controller, no input lacks\u003c\/li\u003e\n\t\u003cli\u003eNo extra power supply needed\u003c\/li\u003e\n\t\u003cli\u003eConnections with the controllers are easily made with screwing terminal blocks\u003c\/li\u003e\n\t\u003cli\u003eFirmware of the GamepadBlock can be updated via USB for future additional gamepad types or other feature updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eMore details and getting started information can be found on this page.\u003c\/p\u003e\n","brand":"PetRockBlog","offers":[{"title":"Default Title","offer_id":48401551229149,"sku":"nga1787257821590","price":22.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/1875\/4525\/files\/gamepadblock---joystick-controller-interface-discontinued_1.jpg?v=1787257830"}],"url":"https:\/\/freshstepfashion.shop\/collections\/arcade.oembed","provider":"My Store","version":"1.0","type":"link"}